Catalogo Gibi Marine - Rod Holders
30° STAINLESS STEEL ROD HOLDER - Made of thick stainless steel, it has been used on all over the world fishermen since 30 years.It could be said that "It has been often imitated but never equalized".Latex rubber protection...
45° STAINLESS STEEL ROD HOLDER - Made of thick stainless steel, it has been used on all over the world fishermen since 30 years.It could be said that "It has been often imitated but never equalized".Latex rubber protection...
All AISI 316 stainless steel guardrail rod holder, it has a fixing system that don’t allow to turn itselfon the pipe. This model is also, on side adjustable.Hole measure for pipe diameter of 25 /...
NEW RODHOLDER MADE BY INOX 316L MANUALLY MIRROR-LIKE POLISHEDHORIZONTALLY AND VERTICALLY ADJUSTABLE: IT ALLOWS TO BEND THE ROD TO AN INCH FROM THE SURFACE OF THE WATER,IN ORDER TO SINK THE BITES...
Usefull tools, it gives you the possibility to use two rods on a single rod holder, or if you need,you can use it also like a outrigger holder.
Usefull tools. It’s combines the use of two rods together with outriggersYou could put it in the back of the boats in the lateral rod holder.
Combat rod holder, it can be placed on a normal encashment rod holder and it allow to fightthe fish without body belts or other tools
All AISI 316 stainless steel guardrail rod holder with new design, it has a fixing system that don’t allow to turn itselfon the pipe.Hole measure for pipe diameter of 25 / 28 / 30
IT’S ADJUSTABLE IN EVERY TYPE OF GUARDRAIL.IT’S ESSENTIAL WHEN YOU HAVE GUEST ON BOARD.
Same characteristics of ART.132, more, thanks to its dimension, it can be used with electrical reels.
This tool give the possibility to fishing with rods parallel to the seawater.In this way you can improve the potentiality of this kind of fishing.Over the regulation of the inclination in comparison to...
Useful tools for the trolling.It can be used in astern rodholder to permits to the rod to work parallel to the water.Plug into the side rodholder and right inclined it can be used to diverge the rods...
For this rod holders is not necessary do holes in your boat.To fix it, are necessary only 4 screws.Thank’s his double regulation you can orient your rod in all the directions.Very strong, it’...
Tools that can be used as a rod holder or a outriger holder.It can be used on the staircase hole, to have a central rod holder.
Rod-hanger to fix on ceiling or in a wall of your boat.They are made of anodixed aluminium with internal journal box in PVC.You can have it in two color : Black and Gold.It’s fix is obtained with...
Nr. 2 safety rope with spring hook at each end inside every pack.Lenght 140 cmIt’s used to fix your equipment to the safety ring on the rod holder.It’s important to use it to avoid that your...
As ART.133 , with plugged up bottom and with little drainpipe.Standard it has the 30° inclination. For different angle you must indicate this in the order’s note.
This rod holder can indifferently be used for unusable rod, or installed on inclinated walls. Protection in rubber as the precedents.In comparison to the Art. 134 the superior plate is of square form...
Same characteristics of ART.133, but thanks to the turning kit mounted inside, the rod turn towards the prey’s direction.
This rod holder cand also be used for resting rods or can be placed on sloping walls.Rubber protections as previous models.Different slope on demand.
Specifically designed for stand-up or drifting fishing.It allows the rod to rotate towards the prey and avoids the usual breaking of the line loop.Suitable for all kind of rod holder.
As ART.139, but it brings 3 rods, more, it can be used as on the floor rod holder,simply by turn it upside down.
Light, with three adjustable rod holder.It’s to fill in a normal rod holder.
Mounted on normal rod holder, it turns the rod toward the prey without extract it.
