Inflatable Stand Up Paddle Board Repair Kit

Ease of use

The kit includes 2 tubes of glue, 4 PVC sheets, 1 spatula, and sandpaper.

Resistance to salt water

Resistant to high pressure and salt water.

Compact design

Handy, pocket-size format (compact) that you can take with you everywhere.

Contents of the box

Instructions for use2 tubes of glue4 PVC repair sheets1 spatula1 sandpaper

Instructions

Lightly sand the damaged surface and clean with soapy water. Dry the surface with a cloth. Cut out a PVC patch with rounded corners. Using a pencil, locate the area of the board to be glued by drawing around the patch.Apply the glue to the surface of the patch and on the defined area using the small teeth of the spatula. Stick on the patch. Use the smooth side of the spatula to push out the air and excess glue. Press firmly until it hardens

Safety advice

DANGER. Flammable liquid and vapours. Causes eye irritation. May cause drowsiness or dizziness. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames, and any other source of ignition. Do not smoke. Only use in open air or in a well-ventilated area.In case of fire: Use carbon dioxide foam, dry powder, or mist to put out the fire.

DANGER IN CASE OF EYE CONTACT

carefully rinse with water for several minutes. Remove contact lenses if the victim is wearing them, and if they can be removed easily. Continue to rinse. Repeated exposure may cause skin dryness or cracking. Be careful to avoid electrostatic discharges. Dispose of the contents/packaging according to national laws.

STORAGE

Sheet to be cut to size:Optimal life: 5 years at room temperature (16-22°C, 30-70% humidity), protected from direct light, and in its packaging.Minimum temperature when repairing: +10°CStorage temperature -10°C to +40°CTube of dissolution liquid:Closed storage, away from heat sources (highly flammable)Optimal life:- 5 years unopened and sealed- 6 months once opened and kept closed

After-sales service

Ask for advice on repairs in our store workshops.